After all, the wire cover is designed for safety and convenience it might as well fit in with your décor. It should also be a color that matches the surrounding wall. First, the covering should have enough space for the wire(s) you want to conceal. Select a Covering: There are a few considerations when making your purchase.However, stick-on ones are recommended, as they won’t damage the wall surface during installation. Purchase a little more than you need, whether you use stick-on coverings or a cover that screws into the wall, in case of any errors. Take Measurements: Use a measuring tape to determine how much wire covering to buy.To successfully install a wall wire cover: Below, we’ll explain how to install one and mention a few other options for keeping wires safely tucked away. There are various options for concealing them one is a wall wire cover. Televisions, audio/video recorders, and computers can have many different wires. But when you add electronics, electrical devices, and light fixtures, more wires may be placed externally. Run TV wires inside the wall.Most electrical wiring is located within walls and therefore remains safely out of sight. RELATED: 11 Ways to Keep Electronics From Taking Over the Living Room 4. But when painted the same color as your wall (using latex-based paint), they seamlessly blend into the space. Cord covers are typically sold in neutral colors like white or metallic gray that can stand out if your wall is a different color. Then, mount the raceway base to the wall with screws according to the manufacturer’s instructions, lay the TV cords inside the channel, and snap the cover in place over the top. In the case of the Cable Raceway, you’ll cut the base and top of the cord cover using a hacksaw. To install and effectively hide TV wires, measure the span of wall between the base of the screen and the floor-that’s the length of cord cover you need, and you can often cut to fit. Plastic tracks like these mount directly to the wall on top of wires. If the cords dangling from your wall-mounted TV are distracting you from what’s on screen, conceal them with cord covers like the D-Line Cable Raceway, a favorite in our researched guide to the best cable management. You can recreate the stand from scratch with reclaimed wood: Follow the blogger’s detailed instructions for how to use a table saw to create a recessed groove in the back leg, then run the cords for your TV and other entertainment essentials down the groove in the leg to keep them out of sight. This one designed by Heidi from Kruse’s Workshop (and featured on Tatertots & Jello) keeps cables contained in a notch that runs down the middle leg at the back of the unit. If you’re feeling a bit craftier, you can hide a tangle of cables behind a stand-mounted TV by incorporating built-in cord storage into the design of your DIY TV stand. (These hooks help hide charging cords and cables at your desk really well, too!) Like most of the line of renter-friendly solutions from 3M, you’ll need to press the clips in place for 30 seconds and, an hour later, you can hook in one or more cords and have them run neatly down the legs of your console. To do so, adhere clear cord clips like these Command Cord Clips along the back edges of your furniture. Dangling cords disappear quickly when you anchor them to the silhouette of the nearest furniture.
0 Comments
Leave a Reply. |